When connected to your phone, Rylo's settings are customizable directly through the app. You can use the following steps to update them:
- Connect Rylo to your phone
- Open the Rylo app
- Tap

You're able to adjust the available modes, image quality, sounds, and vibrations on Rylo. You'll also be able to view version, storage, and serial information in this menu—see the table below for descriptions of each setting.
Capture Modes |
When Rylo is connected to your device, you can enter this menu to toggle modes ‘On’ or ‘Off.’ After a mode is toggled ‘Off,’ you won’t be able to select this mode for capturing until you switch it back to ‘On.’
|
|
|
|
Charge |
Rylo's battery percentage |
|
|
Storage |
The SD card's capacity: used / total capacity
|
|
|
Remote Control |
When Rylo is connected to your device via Bluetooth Remote Capture this will appear, confirming the bluetooth connection
|
|
|
Capture Quality |
Normal: 60 mbps
High: 110-130 mbps. This setting uses the highest supported speed by the SD card to obtain the best quality. We recommend that you always set this to High for the best image quality possible.
|
|
|
Sounds |
Enable or disable Rylo's sounds |
|
|
Vibrations |
Enable or disable Rylo's haptic vibrations |
|
|
Photo Timer |
Set Rylo’s delayed photo capture to off (default), 3 seconds, or 10 seconds |
|
|
Firmware |
The version of software installed on Rylo |
|
|
Serial |
Rylo's unique serial number |
|
|
Format Rylo SD Card |
Reformat Rylo's SD card |
You can use our Tune feature to manually adjust the basic elements of your photo or video's appearance, like contrast, vibrance, tone, and others. At this time, manual camera adjustments aren’t able to be made.